Technical Information

Floorcrete floor screeds are pump applied, self-levelling, synthetic anhydrite. Ideal for sub floor levelling, they provide a smooth, flat surface for the application of all floor finishes.

Suitable for most commercial and domestic buildings as a levelling layer, Floorcrete screeds offer complete versatility of use: with thermal and acoustic insulation, electrical services and under-floor heating systems.

Using Anhydrite rather than Cement in the screed means:

  • Minimal cracking and no curling
  • Rapid strength development
  • Foot traffic in 24 to 48 hours
  • Self-compacting
  • Protein free
  • Environmentally friendly product

Strength and versatility mean:

  • No construction joins
  • No reinforment
  • BRE Test Category A BS8204
  • Weight saving due to low design thickness
  • Speed of application
  • Reduced build programmes
Technical Data
Appearance/colour Off-white fluid mortar
Water demand 13-15% b.w.
pH >10
Wet Density 2200kg/m3
Dry Density 2000kg/m3
Composite Screed Properties (Typical)
Nominal 750kg/m3 Gyvlon Binder + Standard Sand to clause 5.1 of EN196-1: 1994 and 13.5% water.
Flow DIN 1060 Flow Ring 260mm
Setting Time EN196-3:1994 Vicat
Initial Set > 300 Mins
Final Set < 660 Mins
Compressive Strength  
3 days > 15N/mm2
28 days > 30N/mm2
Flexural Strength  
3 days > 3 N/mm2
28 days > 8 N/mm2

Home | The Product | Quality | Technical Information | FAQs | Contact Us | Sitemap
© 2019 Floorcrete: All Rights Reserved
Site design and build: Toby Wallis Communications